Autoality Incorporated

Zirconite ZQ5 Quartz Rim Coating - 15 ml

Zirconite ZQ5 Quartz Rim Coating - 15 ml
Zirconite ZQ5 Quartz Rim Coating - 15 ml
SKU: ZIR528015
Weight: 0 lbs 12 ozs
A wheel coating designed for extreme protection on hard-working wheels!
Price: $49.99
Autoality's Ships Free Program

When you see the Ships Free logo, that item Ships Free with no minimum quantity or dollar amount everyday!
Product Details
  • Designed for extreme protection on hard-working wheels.
  • Withstands high temperatures and harsh chemicals.
  • Keeps your wheels cleaner longer.
  • Makes cleaning your wheels easier.
  • 1 coat lasts 6 months/6,000 miles and can be doubled with a second application.
Zirconite ZQ5 Quartz Rim Coating was designed for extreme protection on hard-working wheels! ZQ5 was formulated to withstand high temperatures and harsh chemicals. It chemically bonds to wheel surfaces to ensure ultimate durability and protection. 

After applying ZQ5, you will notice your wheels are easier to clean. ZQ5's surface technology provides excellent brake dust, stain and contaminant resistance. Your wheels will stay cleaner for longer, and will be easier to clean when the time comes.

One application of ZQ5 will last approximately 6 months or 6,000 miles. It's easy to double that durability with a second coat! You can also coat your calipers with ZQ5 as it will withstand temperatures in excess of 392ºF.

How to prep your wheels for ZQ5 application:
  1. Thoroughly clean your wheels. An iron-removing wheel cleaner is recommended.
  2. If necessary, clay your wheels to remove any remaining bonded contaminants.
  3. To ensure proper bonding of ZQ5, prep the wheels with Zirconite Panel-Prep to remove any remaining polish and silicone residues. 
How to apply Zirconite ZQ5 Quartz Rim Coating:
  1. Ensure wheels are dirt and contaminant free and must be completely dry.
  2. Ambient working temperature should be between 41ºF - 68ºF and remain there for at least 12 hours after application is completed.
  3. Apply a liberal amount to the suede side of the finger pad.
  4. Distribute ZQ5 via the finger pad evenly over the wheel surface, contours and spokes ensuring no areas are missed.
  5. Allow the product to flash off for up to 5 minutes, climate dependent.
  6. Remove any residue with a clean, dry microfiber towel.
  7. Using a second clean, dry microfiber towel, remove any remaining residue, leaving a high gloss finish.
  8. Proceed onto wheel #2 and so on.
For increased durability, apply a second layer of ZQ5 4 hours after the initial application. 

In the kit:
  • 1 x 15ml bottle ZQ5
  • 2 x finger pads
  • 2 x micro suede cloths
  • 1 x glove
  • 1 x instruction leaflet
  • 1 x Zirconite sticker
Made in Britain
Product Reviews
Rate this product:  1   2   3   4   5