P&S Reset Clay Towel

• Removes industrial fallout, overspray, water spots, rail dust, surface rust and other bonded surface contaminants.
• Use on automotive paint, metal and glass.
• Works fast and achieve professional results.
• Creates an incredibly smooth paint finish.

The P&S Reset Clay Towel is the latest innovative product for the removal of industrial fallout, overspray, water spots, rail dust, surface rust and other surface contaminants from the surface of automotive paint, metal and glass. Reset works fast and achieves professional results with advanced rubber polymer technology. Reset easily glides over the surface to remove contaminants three times faster than clay to create an incredible smooth paint finish. Use with your favorite clay lubricant.

How to use your Reset Clay Towel:

1. Wash the entire vehicle prior to using the Reset Clay Towel.
2. Make sure the vehicle surface is cool and out of direct sunlight. Do not use on hot surfaces.
3. Spray Paint Gloss or your favorite lubricant onto the area to be worked on. You cannot apply too much lubricant.
4. Rub the Reset Clay Towel on the area to be cleaned. As you glide the towel over the surface you will feel it removing the contaminants. Continue process until the paint surface is smooth and all contaminants have been removed.
5. Wipe area clean with a microfiber towel.

Note: Surface lubricant is essential for proper use of the Reset Scrubber. Water is no considered an adequate lubricant. The Reset Scrubber is not solvent resistant and any use of solvent or like product will significantly damage the rubber surface. Do not store in direct sunlight.

Size: 12" x 12"