Nasiol Water Spot Remover - 500 ml

Water spots are typically formed by mineral deposits left behind after water evaporates. Over time, these spots can become embedded in the surface, leading to visual imperfections and, in the long run permanent damage.

Nasiol Water Spot Remover was developed to effectively and safely remove moderate-level water spots. Safely use on paint, glass, hard plastics, metal surfaces, matte surfaces and paint protection film. 

The formula is ready-to-use and leaves a spotless surface. It's non-abrasive, free of VOC's and has a pleasant fragrance. 

How to use Nasiol Water Spot Remover:

1. Ensure surfaces to be treated are free of dust, dirt and other contaminants.
2. For best results, shake bottle well and apply in shaded areas.
3. Spray Water Spot Remover directly onto the surface to be treated. Surface can be wet or dry, but should be cool.
4. Wipe with a microfiber towel and rinse thoroughly.
5. If needed, allow to dwell 1-3 minutes.

Do not allow the product to dry on the surface. Wash and rinse the vehicle to remove remaining product residue. If the product is not rinsed off after application and left for too long, staining may occur. That staining can only be removed by polishing.

Size: 500 ml