Nasiol TrimCoat - 30 ml

• Protects exterior and interior plastic, vinyl and rubber trim for up to 2 years.
• Creates a nice satin, semi-gloss appearance.
• Offers UV, chemical and scratch resistance.
• Developed for both professionals and DIYer's.

Nasiol TrimCoat is designed to protect and keep interior and exterior plastics looking new for up to two years. TrimCoat darkens and gives your trim a nice satin, semi-gloss appearance! Its water repellency keeps surfaces cleaner for longer, while also adding UV, chemical and scratch resistance to treated surfaces. You can safely apply TrimCoat to exterior and interior plastic, vinyl and rubber trim such as bumpers, lights, moldings, door handles, grilles, fenders, side-view mirror housings and windshield cowlings.

How to apply Nasiol TrimCoat:

1. Prepare the surface using Nasiol Clean to remove any residual contamination and to improve the bonding performance of TrimCoat.
   
2. Shake bottle gently and pour 5-8 ml onto the applicator pad. 
3. Apply TrimCoat in a crosshatch pattern.
4. Wait 48 hours for drying and curing period.
5. Keep coated surfaces away from direct sunlight, contaminants and water for 48 hours after application. Wait 48 hours before washing.
   

Application tips: 

• Application to a mid-size vehicle takes 15-20 minutes.
• Ensure temperature and relative humidity (RH) are 41 F - 86 F / 50% RH)
  
• If the ambient temperature or relative humidity are higher than suggested, the product may cure faster than expected.
• Do not forget to keep the lid closed during application.
• 5 - 8 ml is enough for one 3 ft. x 3 ft. section.

Specifications:

• Durability: Up to 2 years
• Chemical Resistance: 12>pH>1
• Salt Water Resistance: Yes
• Moisture Resistance: Yes
• Dry Film Thickness: 700-1000 nm
• Dry to Touch Time: 2 hours
• Water Contact Angle: 115@10 uL
• Water Sliding Angle: 20@20 uL
• Gloss Rate @60 (ISO-2813:2014): 80

Size: 30 ml