412.860.8710
Autoality Incorporated

Nanoskin Autoscrub Fine Grade Wash Mitt

Nanoskin Autoscrub Fine Grade Wash Mitt
Nanoskin Autoscrub Fine Grade Wash Mitt
SKU: AS-016
Weight: 0 lbs 10 ozs
For light to medium surface contaminants. Great for new or dark colored vehicles.
Price: $54.99
Autoality's Ships Free Program

When you see the Ships Free logo, that item Ships Free with no minimum quantity or dollar amount everyday!
Availability: Currently On Backorder
Product Details
  • The next generation of surface preparation, new advanced polymerized rubber technology.
  • Works quickly and easily to remove paint over spray, rail dust, industrial pollution and other bonded surface contaminants.
  • Works on automotive paint, glass, moldings and plastic.
  • Must be used with a lubricant
    • Avoid using soap and water as your lubricant.
  • To clean, simply rinse off the accumulated contaminants with water.
    • If dropped, no worries, just rinse off with water.
  • Can be used on 50 plus vehicles.
The Fine Grade Mitt is designed to safely and quickly remove light to moderate contaminants.

The Nanoskin Autoscrub system works fast and achieves professional results with a new advanced polymerized rubber technology which will replace your need for a clay bar. The Nanoskin Autoscrub Mitt will safely and easily remove paint over spray, water spots, fresh tree sap, rail dust and other bonded surface contaminants from your paint, glass, moldings and plastic.

Unlike a clay bar which needs constant reshaping, the Autoscrub Mitt can be cleaned by simply rinsing off the accumulated contaminants with water. If you drop the Autoscrub Mitt on the ground, no worries, just rinse the mitt clean and you are ready to keep using it. The Autoscrub Mitt glides easily across the surface, allowing for sturdy and controlled handling.

Using sufficient lubrication is crucial to proper application of the Autoscrub. Make sure to only use the Autoscrub on clean, cool paint and out of direct sunlight. Never use on a surface below 55°F or above 144°F.

To use, thoroughly wash the vehicle to free it of dust, sand and dirt. Also, make sure any tar and grease is removed prior to application. Mist a sufficient lubricant onto the surface evenly and polish the surface with light pressure. I like to use Meguiar's Last Touch diluted 1:1 as my clay bar lubricant. Plain water does not make an adequate lubricant. Wipe off any remaining residue on the paint with a clean dry microfiber towel. To clean your Autoscrub Mitt, simply rinse it with water.

The Autoscrub Mitt has a protective coating to ensure stability during transportation. Before using it on your paint for the first time, break-in the towel following these simple instructions...
  1. Moisten the Autoscrub with desired lubricant.
  2. Moisten a portion of window glass or other glass surface.
  3. Rub the mitt in a circular motion against the glass for 30 to 60 seconds. You may see a white soapy foam. This is the protective coating coming off.
  4. Don't use on paint until the polymerized rubber is soft and slightly tacky.
*Cold temperatures may stiffen the mitt. Warm the mitt surface before using.

Mitt Size: 6" x 8.7"
Mitt Color: Blue
Product Reviews
Rate this product:  1   2   3   4   5