Labocosmetica 2pH+ Wash Cycle

• Complete and balanced removal of organic and inorganic (mineral) dirt.
• Leaves surfaces fully cleaned, ready for advanced detailing, polishing or for the application of PPF and wraps.
• An advanced chemical cleaning system that reduces manual contact with surfaces.
• A dynamic approach, suited to various contamination levels.
• VDA certified for compliance with automotive standards on sensitive surfaces.

Professional detailers have to tackle complex and layered dirt that requires an evolved strategy! This is where Labocosmetica's 2pH+ Wash Cycle comes into play! It's a two-phase approach that combines the strength of an alkaline TFR like LIBERA with the complementary action of an acidic TFR like RENOVA.

Dirt on the exterior of vehicles is never uniform! It consists of organic contaminants such as oils, carbon residues and grease; and inorganic mineral contaminants such as limescale, cement dust and industrial residues. Using only one type of pH cleaner, either alkaline or acid, is not always enough to effectively and safely eliminate all contaminants!

Labocosmetica's 2pH+ Wash Cycle overcomes these limitations with a sequential approach; LIBERA for tackling organic contaminants followed by RENOVA for tackling inorganic contaminants!

Both LIBERA and RENOVA have been developed by Labocosmetica to provide the power of a traditional traffic film remover with the surface safety offered by a premium prewash product. This allows the system to be using in a multitude of situations!

Detailer's can use the 2pH+ Wash Cycle for:

• Preparing the exterior for advanced detailing or polishing
• Before applying PPF or wrapping
• To remove the presence of layered, or grayish road film
• On vehicles showing mineral residues from acid rain or hard water
• As maintenance products on vehicles protected with PPF or wraps

Phase 1:

Use LIBERA to tackle organic contaminants regular prewashes can't tackle. It deeply dissolves road film, grease oils and tough dirt. Its advanced formula relies on evolved surfactants and emulsifying agents that quickly and deeply dissolves contaminants while ensuring surface safety on delicate surfaces. 

Phase 2: 

RENOVA is an intelligent acidic traffic film remover combining he power of a TFR with the safety of a highly lubricated shampoo. It completes the cleaning process by targeting mineral and inorganic contamination. It removes limescale and hard water spots, restoring the surface pH and natural gloss levels. It's ideal as the final cleaning phase before polishing or protective film application.

How to use the Labocosmetica 2pH+ Wash Cycle:

1. Ensure the vehicle is cool and in the shade if working outdoors.
2. Dilute LIBERA in a pump sprayer to your desired concentration:
   • 1:5 - Heavy Dirt/Grey film present
   • 1:10 - Moderate Dirt
   • 1:20 - Light dirt or maintenance cleaning
3. Spray onto dry bodywork from bottom to top. Do Not Foam onto surface.
4. Allow to dwell 3-6 minutes. Do not allow product to dry.
5. Rinse with high-pressure water.
6. Dilute RENOVA based on your method of application:
   • 1:50 - Contact manual wash
   • 1:10 - Foamed onto the car
   • 1:200 - Maintenance shampoo for PPF
7. RENOVA Application:
   • Contact/Manual Wash Method - Wash vehicle with a microfiber wash mitt working from the top to the bottom. Once completed, rinse thoroughly and dry. Use this process for maintaining PPF, dilute 1:200.
   • Foamed Method - Apply to the vehicle and allow to dwell for a maximum of 60 seconds. Rinse immediately.
8. Rinse thoroughly and dry.

Labocosmetica's 2pH+ Wash Cycle responds to the real needs of modern detailers: maximum cleaning power with maximum surface safety!

Thanks to the synergy between LIBERA and RENOVA, every surface is treated thoroughly, deeply and safely. It's an intelligent, balanced, and certified system for those who demand high-level professional standards!