Koch Chemie Marine Gm3.01 Gelcoat Micro Cut - 1000 ml

Koch Chemie Marine Gm3.01 Gelcoat Micro Cut is a fine machine polish designed for lightly weathered and dull gelcoat and boat paint. It removes polishing haze, holograms, and fine scratches while restoring a smooth, clean, and glossy appearance.

It's the ideal finishing polish after compounding with Gf6.01 Gelcoat Fine Cut, Gh8.01 Gelcoat Heavy Cut or Gh9.01 Ultra Heavy Cut. Gm3.01 Micro Cut will remove any remaining compounding haze and prepares the surface for subsequent protection!

Areas of use: For the permanent removal of compounding haze, holograms and fine scratches on gelcoats and boat paints.

How to use Koch Chemie Marine Gm3.01 Gelcoat Micro Cut:

1. Use with a rotary or dual action polisher.
2. Apply 5 pea sized drops to your favorite polishing or finishing pad and work in a crosswise pattern.
3. Spread across the section at a slow speed, then increase speed to polish. Increase speed on a rotary polisher to approximately 1,000 rpm and use a dual action polisher on its highest speed setting.
4. Remove any residue with a clean microfiber towel.

After your polishing has been completed, protect the surface with Koch Chemie Marine Protective Sealant to prevent rapid oxidation or soiling.

Size: 1000 ml