IK Foam Pro 12 ALK Sprayer

• Creates a thick layer of foam utilizing alkali based chemicals with surfactant properties.
• Has a compressed air connector for easy pressurization or hand pumping and spray application.
• Stable base with footrest.
  
• Stainless steel handle.
• Blue plastic trim to easily identify alkali based product.
• Total capacity of 2.64 gal. with a usable capacity of 1.58 gal.

The IK Foam Pro 2 ALK sprayer is equipped with the highest performance in terms of safety and ease of use. Manufactured for the generation of dry foam and long lasting foam. Designed to be used with alkali chemicals with surfactant properties. They are intended for use in different sectors, such as detailing, cleaning and disinfection.

Two additional felt strips are supplied with the sprayer. Use the white felt as a general rule for all chemicals except extreme alkalis. Use the grey felt for extreme alkalis (pH 11-14). Remove the used felt with a pointed object. Select the appropriate felt according to the pH of the product to be sprayed.

Includes three tips for different types of foam:

• Orange Tip = Wet Foam
• Grey Tip = Intermediate Foam
• Green Tip = Dry Foam

Features:

• Universal Schrader plug for compressed air plug.
• Strong translucent tank with level indicator
• Stable base with footrest 
• Large integrated funnel for easy filling
• Holder system for inflator
• Easy use lance parking
• Stainless steel handle with safety lock
• Safety valve especially resistant to acids
• Safety valve set to 3.5 bar
• Content identification system with colored cards
• Total capacity of 2.64 gal. with a usable capacity of 1.58 gal.

How to use the IK Foam Pro 12 ALK:

1. Fill the tank following the dilution ratio recommended by the foaming agent you are using.
2. Pressurize the sprayer by either pumping the unit or using compressed air until the pressure valve pops out.
3. Make sure the felts are clean and the appropriate felt is chosen based on the pH of the product being sprayed.