Gtechniq GT1 delivers the trusted performance of a Gtechniq ceramic coating in a fast, single-layer application! Engineered for mobile detailers and enthusiasts alike, GT1 can be applied outdoors with ease while offering a more sraightforward application process!
- 1 Year or more protection in an easy to apply single layer product
- Can be applied outdoors with ease
- Suitable for all paint finishes, PPF, vinyl wraps, wheels and glass
- Outstanding hydrophobic performance and tight water beading
The advanced ceramic formula chemically bonds to the surface, creating a durable layer of protection that helps resist swirl marks while delivering outstanding hydrophobic performance and tight water beading! It's self cleaning effect releases dirt more easily, helping keep surfaces cleaner for longer!
Designed as a true all-surface coating, GT1 is designed to provide 12 months or more of protection on paintwork, PPF, wheels, rims and unswept glass. In the swept area of a windshield, durability is reduced to several months due to abrasion from the wipers.
How to Apply Gtechniq GT1:
Before you Begin: Park the vehicle out of direct sunlight and make sure the ambient temperature is between 41°F and 104°F. Working in the right conditions will make the process smoother and help you achieve the best finish.
Step 1: Deep Clean Your Car: Even if your car is brand new, Gtechniq recommends carrying out a full decontamination wash before applying any protection. This removes transport residue, fallout and any bonded contaminatnts picked up at the factory or dealership.
You'll find guidance in the wash guide provided. You do not have to use Gtechniq products for this step. What matters most is that the surface is completely clean and contaminant free before you move on.
Once washed, ensure vehicle is fully dry before moving onto Step 2.
Step 2 - Panel Preparation: Put on the supplied gloves and keep them on while applying the coating.
Spray Panel Wipe onto the MF1 Microfiber Buff Cloth, the lighter grey cloth in the kit, and wipe down each panel you're going to coat.
Work your way around the vehicle one panel at a time. Make sure all streaks and residue are fully removed before moving on. Taking a little extra care here will help ensure a smooth application and the best possible finish.
Make sure the entire vehicle has been prepared in this way before progressing to Step 3.
Step 3: Apply the Coating: Apply GT1 evenly to the supplied applicator pad, ensuring the face is fully covered. The pad should be evenly primed but not overloaded.
Start with the painted panels. Begin at the top of the vehicle and work your way down. Larger areas such as the bonnet or roof are easier to manage in two sections, while smaller panels can be completed in one go.
Apply using smooth, overlapping passes. Work side to side fist, then up and down to create an even, consistent layer. This crosshatch technique helps ensue full coverage and makes missed areas easier to spot.
Flash Time: Allow the coating to sit for a short time until you see it begin to react and separate. You'll notice the change as it shifts from a smooth, even film to a surface with visible beading. In warmer, more humid conditions this usually happens at around 30 seconds. In cooler, drier conditions it can take closer to 60 seconds. Keep your eye on the coating rather than the timer as the exact timing can vary depending on the environment.
Residue Removal: Using a clean MF6 Microfiber Cloth, one of the darker grey towels in the kit, gently remove residue with light, controlled movements. Avoid applying pressure. Immediately follow with a second clean MF6 towel to refine the surface and buff to a clear, high gloss finish.
Inspection: Under good lighting, inspect each panel carefully to ensure all residue has been removed and the finish is even.
Continue this process around the entire vehicle. Re-prime the applicator pad as needed and continue panel by panel until the entire vehicle is coated. Coated areas will feel noticeably slick to the touch. Once all painted surfaces are complete, move on to the windows, then trim, and finally the wheels.
Step 4 - Cure: For best performance, allow the coating to cure for 7 days before washing the vehicle. This allows full bonding and ensures maximum durability.
What's in the Kit:
- (1) 50 ml GT1 Ceramic Coating
- (1) 100ml Panel Wipe
- (1) AP5 Applicator Pad
- (1) MF1 Microfiber Buff Towel
- (4) MF6 Microfiber Towels
- Protective Gloves
- (1) Wash Guide
- (1) Application Guide
View Cart {{shoppingcart.totalQuantityDisplay}} Item(s)
