412.860.8710
Autoality Incorporated

Gtechniq EXOv4 Ultra Durable Hydrophobic Coating, 30 ml

Gtechniq EXOv4 Ultra Durable Hydrophobic Coating, 30 ml
Gtechniq EXOv4 Ultra Durable Hydrophobic Coating, 30 ml
SKU: EXOv4 0.03
Weight: 0 lbs 10 ozs
Offers the warm gloss look with increased performance and longer durability.
Everyday: $69.99
Clearance Price: $49.99
Autoality's Ships Free Program

When you see the Ships Free logo, that item Ships Free with no minimum quantity or dollar amount everyday!
You Save: $20.00 (29%)
Product Details
  • EXOv4 has improved durability. Now 18-24 months.
  • Same great gloss, water and dirt repellency.
  • Significantly easier to apply than EXOv3.
Over the years you've come to expect easy application, a warm gloss look and unsurpassed water repellency from Gtechniq's EXO paint coating. EXOv4 follows in that tradition! EXOv4 offers even easier application, better durability and lower VOC levels than its predecessors. Durability tests during winter, when the roads are heavily salted, have shown an improvement in durability of around 30%.

The new EXOv4 has a longer working time for easier application due to its slower flash off time. This allows the hydrophobic film to form a more consistent film, making EXOv4 last 30% longer than EXOv3 did.

Application for EXOv4 is similar to EXOv3, but with a longer working time. You will want to follow all of your normal polishing and prep steps prior to application. If the surface of the vehicle is between 41°F and 59°F, wait two minutes before removing any residue. If the surface is between 59°F and 77°F, wait one minute before removing any residue. If surface temperature is over 77°F, remove any residue immediately. We do recommend using two towels to remove residue. One for the initial wipe, and a second to remove any left over residue.

EXOv4 can be applied as a standalone coating or as a top layer over Gtechniq C1 and Gtechniq Crystal Serum Light (CSL). If you are applying EXOv4 over top of C1, application should occur more than 2 hours but less than 12 hours after you finish the C1 application. When applying over CSL, you can start your application immediately following application of CSL or up to 24 hours after you have completed application of CSL. If you decide to apply two layers of EXOv4, you can start your second layer immediately upon completion of the first layer.

You will want to allow EXOv4 to cure for 12 hours prior to getting wet and wait one week before washing your car. Store opened bottles of EXOv4 in a dry and cool place. It is recommended to use opened bottles within three months of opening.

Size: 30 ml

Product Reviews
Rate this product:  1   2   3   4   5