- A 9h professional grade coating.
- One coating to protect all non-porous surfaces...paint, glass, plastic trim, wheels and bare metal.
- Up to 5 years durability with proper maintenance.
- Protects against scratches and other harsh elements including graffiti.
- Handmade in the USA in small batches.
- Professional application is strongly recommended!
TITAN Ceramic Coating is Gloss Shop's 9h professional grade coating offering their highest level of Silicone Dioxide (SiO2) content in a coating. With proper maintenance, TITAN will offer up to 5 years durability with a single layer. Once cured, TITAN offers the most resistance to scratches and other harsh elements including graffiti.
Like all Gloss Shop coatings, one bottle of TITAN can protect all non-porous surfaces on your car such as your paint, glass, plastic trim, wheels and bare metal surfaces. When applied to exterior plastics and trim, the finish will remain in a natural looking OEM finish. And since it comes in a 50 ml bottle, you can apply it to all of these surfaces without having to purchase multiple bottles or multiple products, saving you money.
Application Note: Due to its quick flash time, application by a professional is strongly recommended!
Unlike most coatings on the market, TITAN is handmade in the USA in small batches and is VOC compliant in all 50 states. While it does not have strong odors common to ceramic coatings, it is recommended you apply TITAN in a well ventilated area with proper protective equipment.
Prior to applying TITAN, you will want to properly prep your car. You will need to wash, clay, decontaminate and, if desired, polish your paint. Once you have finished prepping your car, you will want to use a product such as Optimum Paint Prep to make sure any silicone or wax if fully removed from the surfaces you want to coat. You are now ready to apply TITAN.
Make sure to shake the bottle well. You want to work out of direct sunlight and have an ambient working temperature of 60-85° F. Pour a few drops onto your applicator and work in sections no larger than 2 ft. x 2 ft., wiping in a crosshatch pattern, making sure to get complete coverage. Allow 1-2 minutes dry time before gently wiping away any residue. Do not use heavy pressure when wiping. The cooler the ambient temperature the longer your dry time, but make sure not to cross over the 2 minute mark as the residue will become grabby and require additional effort to remove.
Once you have finished applying TITAN, make sure the car is not exposed to water within the first 24 hours. To allow for proper curing, you will have to wait 1 week before you can wash your coated car. You will also need to throw out the applicator and towels you used with the coating. The residue on them will crystallize in the fibers, making them rough and abrasive.
Size: 50 ml
View Cart {{shoppingcart.totalQuantityDisplay}} Item(s)
