DuraSlic EASE Ceramic Coating - 50 ml

• Provides a high level of gloss and slickness with excellent water beading and sheeting.
• Offers up to 5-years of protection.
• Can be applied to the entire vehicle before leveling.
• High, 10H, film hardness.

DuraSlic EASE is a revolutionary ceramic coating that can be applied to the entire vehicle before leveling off the excess. EASE offers a high level of hydrophobicity, gloss, abrasion resistance and UV protection in a robust, 5 year ceramic coating. Apply to paint, glass and plastics to impart an unprecedented level of protection from water, chemicals, UV and corrosion. 

EASE eliminates the hassle of applying ceramic coating to small areas or single panels and then waiting for a rainbow effect before proceeding. Blending one section with another is no longer necessary. Significant time is saved in the application process, simplifying the entire installation. 

EASE is truly a breakthrough in ceramic coating technology. It is the first hand-applied ceramic coating that an be applied to an entire vehicle prior to leveling. The solvents dry quickly, leaving a residue that can be removed anytime within 90 minutes, leaving a high gloss finish and robust protection.

How to apply DuraSlic EASE:

1. Wash and decontaminate the paint and surfaces to be treated. Correct the paint to your desired level.
2. Clean panels to be treated with DuraSlic Panel Prep and Glass Wipe in order to remove any remaining compound or polish from all surfaces.
3. Shake well and apply an ample amount to the DuraSlic Coating applicator. 
4. With even pressure, apply using a crosshatch pattern. Work panel by panel, coating the entire vehicle thoroughly (apply to glass separately as this will have a different cure time, check at 15 minutes).
5. At 45-60 minutes, use a soft, clean microfiber towel to test removal in a small section. If the coating removes easily, then proceed to remove excess material from the vehicle. If the coating is streaky or wet, wait another 15 minutes and test again.
6. A 2-towel method should be used for removal. Use a soft, clean microfiber towel to level the coating and a second towel to buff away any excess.

Application Notes: EASE will haze/flash quickly and may have a dry appearance. This is part of the bonding process. Ideal application is between 70-80F (21-27C) and 40-60% relative humidity. Do not apply in direct sunlight or high wind conditions. It is normal for EASE to separate over time, always shake the bottle lightly prior to application.

Post Application Notes: The coating begins to cure as soon as the residue is removed. The coating will reach 7H hardness after 18 hours and fully cure to 10H hardness in 3 days at room temperature. It is rain-ready in 24 hours.