Armour Detail Supply Wheel Coating - 30 ml | High Temperature Quartz Coating | 1-Year Protection on All Wheel Finishes & Types

Armour Wheel Quartz Coating is a high-performance solution designed to protect and enhance the appearance of your wheels. With a solids content of 76% (SiO2) and a formula that's specifically engineered to resist heat and heavy abuse, this coating provides superior protection against brake dust and buildup. The coating's advanced composition creates a long-lasting barrier that repels contaminants, making maintenance and cleaning of your wheels easier and more convenient. 

• Specifically engineered to resist heat and the heavy abuse wheels see
• Superior protection against brake dust and buildup
• Long lasting, lasts 15,000+ miles or 1+ year
• Apply to any wheel finish or type
• Maintains the appearance and protection of your wheels

The versatility of Armour Wheel Quartz Coating is another major benefit, as it can be safely applied to an array of wheel finishes, including anodized, chrome, painted, powder coated, clear-coated aluminum, and matte finishes. This allows for maximum compatibility with various types of wheels, ensuring that you can enjoy he protection and benefits of the coating no matter what type of wheels you have.

Armour Wheel Quartz Coating provides a durable layer of protection that can last for over 15,000 miles or 1+ year depending on driving conditions. Choose Armour Wheel Quartz Coting for a reliable and low-maintenance solution for maintaining the appearance and protection of your wheels.

Prep:

The Prep is the most important step of the process, Armour Wheel Quartz Coating is great, but it cannot do the prep work for you!

1. Decontaminate the wheel surface using Armour Detail Supply Wheel Cleaner, followed by removing further embedded contamination with a clay bar or synthetic clay mitt.
2. If swirl marks or scratches are present, polish the surface to reduce any surface defects and create maximum gloss.
3. Use Armour Detail Supply Panel Prep to remove any oils/residue left from your polishing step. If you did not polish the surface, repeat this step twice to ensure a clean surface.

Application:

1. After thorough prep prime the applicator with 3 lines to start. Each subsequent application will only need a mall mount, a little goes a long way.
2. Apply Armour Wheel Coating one wheel at a time. Apply using a methodical back and forth or crosshatch motion making sure to have even coverage. Allow the product to "set up" for 1-3 minutes depending on temperature/humidity. Look for light hazing to appear before removing.
3. In a small circular motion level coating 95%+ on first wipe (short nap, pearl weave), the first wipe will have a slight grab to it, but the product should be picked up easily. If the coating begins to smear, it needs additional time to setup. If the product is very hard to remove, it needs less time before removal. Switch to a 2nd towel (plush) for final leveling. Check for any streaks or high spots which can appear as cloudy or dark spots. Repeat this process every wheel.
4. Use a fresh side of the towel every wheel.
5. Armour recommends applying 2 layers for maximum benefits and durability. If you wish to apply multiple layers allow 1-2 hours between layers.

After Care:

• Allow product to sit 12 hours at a minimum for initial cure.
• After 4 hours you can apply Armour Detail Supply AMPLIFY or CERAMIC SPRAY SEALANT to protect the coating during its initial cure. 
• After 12 hours the vehicle can be driven and get wet.
• Do not wash or induce to chemicals for 7 days.

Spcificatitons:

• Solids Content: 76% (SiO2) at 99.9% Purity
• Hardness: >9H
• Chemical Resistance: Extreme, 0-13 pH
• Durability: 15,000+ miles or 1+ year real world tested
• Film Thickness: ~3-4 micron
• Flash Time: 1-5 minutes (2-3 on averagee)
• Coverage: 10-15 ml per wheel set
• Water Contact Angle: 110 Degrees
• Working Temperatures: 40F - 100F
• Shelf Life: 12 months, use within 7 day of opening for best application experience.

What's Included:

• (1) 30 ml Armour Wheel Quartz Coating with Dropper Top
• (2) Mini Microfiber Coating Application Pd
• "How to" Direction Card

Size: 30 ml