3D ACA Flex P1500 6" Orange Sandpaper Disc - 50/Box

• Fast leveling of orange peel and other surface textures
• P1500 is for step 1 in a 2-step approach - follow with P2500
• Uniform abrasive size and placement creates an even sanding mark pattern that buffs out easily
• Long lasting abrasive and anti-clogging technology to reduce waste and save you money
• Designed for dry or wet sanding techniques

Removing orange peel has never been so fast and easy! Save hours of sanding time while leaving behind a shallow, uniform sanding mark patter. Removing orange peel over a single body panel or an entire vehicle is fast with 3D Flex Sanding Discs.

3D's Flex Sanding Discs are designed for use on an orbital polisher. The P1500 discs quickly and efficiently level orange peel and other surface texture to create a flatter, more uniform surface ready for compounding. Use P1500 discs on fresh custom paintwork to create a show car finish or match factory orange peel!

The secret is in the Alpha Ceramic Alumina abrasive technology created by 3D Car Care! 3D invented it from scratch, converting the original raw materials into modified raw material abrasives. No one else has access to this same abrasive grain technology. Having this much control gives 3D the ability to determine the size, shape, hardness, cut ability and breakdown time of the abrasives, making these discs quite unique!

3D then attaches their abrasives to a thin film using a process that ensures uniform placement over the entire disc. By controlling the particle size and placement, 3D controls the depth and pattern of the sanding marks. The results are a sanding mark pattern that is shallow in depth and consistent over the entire surface, allowing you to buff out faster while also leaving more paint on the surface.

3D's proprietary anti-clogging technology prevents the "cementing" of paint particles onto the face of the sanding disc. You still have to clean the face of the disc often, but paint particle are removed. 

In real world testing on average paint hardness, you an expect to use one disc to sand one body panel, although there are exceptions to both extremes. You may get more or less than one body panel based on the hardness of the paint. 

Dry Sanding Directions:

1. Carefully place a single sanding disc on the hook side of the interface pad. Be sure the sanding disc is perfectly centered so that no portion of the interface pad makes contact with the paint.
2. Place the face of the sanding disc against paint and turn on your polisher/sander.
3. Increase or decrease speed setting as necessary. Sanding disc should rotate against paint surface no merely vibrate.
4. Sand one body panel at a time. Clean face of the disc often using a clean microfiber towel or compressed air. When you visually see sanding strength diminished, switch to a new, clean disc.

Wet Sanding Directions:

1. Follow the same directions, only wet the surface to be sanded with a few sprays of clean, soapy, lubricating water.

Qty: 50 discs per box