- Fast cutting compound and polish in one.
- Great for fast-paced, high volume shops.
- Long open time and easy wipe-off.
- Removes sanding marks of P1500 or finer and other paint defects and imperfections.
- Works great with wool or foam pads.
3D I-Cut is a one-step, industrial strength fast-cutting compound and polish formulated for the needs of high-volume production shops where speed is the top priority.
For cutting, I-Cut is formulated for use with a wool pad and a rotary polisher to remove sanding marks P1500 or finer and other paint defects. For polishing, I-Cut can be used with a foam pad on a rotary polisher or orbital polisher to refine the results from the cutting step.
I-Cut is easy to use, provides a long open time and is easy to wipe off. I-Cut works best on a cool surface in the shade, but is sun-friendly and an be used in outdoor work environments.
How to polish with 3D I-Cut:
Sanding Marks: To remove sanding marks, apply 4-5 dime size drops to a wool pad. Buff a section approximately 2' by 2' using a rotary polisher at speed setting 1000 to 1500 RPMs. After sanding marks are removed, remove excess product with a microfiber towel.
Finishing & Polishing: To finish, apply 4 to 5 dime size dops onto a foam polishing or finishing pad. Using low to medium speed setting, buff a section approximately 2' by 2'. When holograms and swirl marks are removed, wipe off any excess residue with a clean microfiber towel to reveal the perfect finish.
Size: 32 oz.