- A SiO2 based wash for the maintenance of coated and uncoated vehicles.
- Contains more than twice as much SiO2 than other "ceramic" washes on the market today.
- Variable dilution ratios based on how much protection you want.
Gloss Shop CeramicGuard Shampoo is the next generation of car wash! This ceramic (SiO2) based shampoo was developed to leave a layer of ceramic protection on your car after you are finished washing. CeramicGuard Shampoo was developed to be a maintenance shampoo for ceramic coated vehicles, however it works very well on uncoated cars.
CeramicGuard Shampoo is pH neutral and safe on all surfaces including, paint, glass, trim and wheels. The slick formula makes washing easier, safer and leaves a high gloss hydrophobic layer of ceramic protection after each wash. You can also use CeramicGuard Shampoo in your foam cannon or foam gun.
If you have used other ceramic based shampoos before, you will notice how much thicker and denser CeramicGuard Shampoo is compared to those other products. That's because CeramicGuard Shampoo contains more than twice as much SiO2 as any other ceramic shampoo on the market today. To get that much SiO2 into the formula, special carrying agents were needed. With this much Si02 packed into the formula the concentrate is opaque, not translucent like other SiO2 washes on the market. When you look at it, you will see the formula looks more like a popular sprayable SiO2 product than other SiO2 wash concentrates.
CeramicGuard Shampoo is extremely versatile due to variable dilution ratios. Gloss Shop recommends adding 1 ounce of CeramicGuard Shampoo per 2 gallons of water. However, you can vary your dilution based on how much protection you would like to leave behind. For added protection, you can mix 1 ounce per gallon of water. You can also go the opposite direction if less protection is desired. You can go all the way down to 1 ounce per 4 gallons of water and still have a safe and effective wash with ceramic protection left behind. Regardless of how you want to dilute it, you will be left with a slick and glossy ceramic protected finish. Just make sure you use CeramicGuard Shampoo in the shade.
Since CeramicGuard Shampoo is pH neutral, you can use it in your foam cannon to presoak your coated vehicle. Adding 1 ounce to your bottle is all you really need, but you can add up to 3 ounces if you want a thicker foam. Using CeramicGuard Shampoo as a presoak will not degrade your coating since its pH neutral. Plus, you will be boosting your base layer coating with it high quantity of SiO2.
If you have a coated vehicle, CeramicGuard Shampoo is the ideal choice for maintenance washes. To get the full life out of your coating you need to properly maintain it. CeramicGuard Shampoo is compatible with any SiO2 coating on the market and not only cleans your car, it leaves behind a layer of SiO2 to help extend the longevity of your coating.
Size: 128 oz.