Choose your the pair of Grit Guards you want.
Many scratches and swirls on the surface of a vehicle are caused by improper washing techniques. Dirt and grit picked up by your wash mitt or sponge get trapped within the fibers of your wash mitt or sponge. When you dip your wash mitt or sponge back into your bucket to rinse and re-lather, not all of the dirt and grit is released. As a result, you drag the dirt and grit over the surface of your vehicle, creating swirls and fine scratches. The Grit Guard Insert will separate the grit from your wash mitt or sponge, saving every enthusiast time and money.
Place a Grit Guard Insert in the bottom of your bucket and simply rub your wash mitt or sponge across the Grit Guard. The radial grid surface design will extract the dirt and grit from your wash mitt or sponge. The dirt and grit will then settle below the Grit Guard Insert and stay there, leaving you with wash water that is free of potentially damaging dirt and grit.
With the Grit Guard Insert you do not have to worry about any dirt or grit in your wash bucket. It has been designed with minimal flat surfaces, so dirt will not settle on the Grit Guard Insert. The four quadrants on the base hold the grid above the bottom of the bucket and calm the wash water preventing the dirt from getting kicked back up above the Grit Guard Insert.
We offer the Grit Guard Insert in four colors: black, blue, red and yellow. It measures 10-1/8 inches in diameter and is solvent resistant and durable.
Wash your vehicle right, and with peace of mind, with the Grit Guard Insert.
Alternative Uses: Although the Grit Guard Insert was originally designed for automotive detailing, it has a number of other uses as well.
Use it to clean paint brushes by running the bristles over the radial grid in a bucket of water or paint thinner.
Use it to clean parts or drain your oil filter.
The four quadrants on the base can be used as a grout grid when laying tile.